
The 4M310-08 is a 5/2-way single-solenoid pneumatic solenoid valve with a NAMUR mounting interface, designed to bolt directly onto quarter-turn pneumatic actuators such as rack-and-pinion ball-valve and butterfly-valve actuators. This guide explains what NAMUR means, how the valve works, where it is used worldwide, and what engineers should check before ordering.
What Is the 4M310-08?
The model code breaks down as follows:
| Code segment | Meaning |
|---|---|
| 4M | 5/2-way internally piloted directional control valve, NAMUR plate-mount series |
| 3 | 300 series body size |
| 10 | 2-position, 5-port, single solenoid, spring return |
| 08 | G1/4" (PT1/4) inlet and exhaust ports |
Key specifications:
| Parameter | Value |
|---|---|
| Valve function | 5/2-way, single solenoid, spring return |
| Port size | G1/4" |
| Effective orifice | 25 mm² (Cv 1.4) |
| Working pressure | 0.15 – 0.8 MPa (21 – 114 psi) |
| Proof pressure | 1.2 MPa |
| Max switching frequency | 4 cycles per second |
| Medium | Clean, dry air filtered to 40 µm |
| Ambient temperature | −20 to 70 °C |
| Body material | Anodised aluminium alloy |
| Protection class | IP65 |
| Lubrication | Not required (oil-free operation) |
In plain terms: the valve has five ports and two positions. It alternately pressurises the actuator's open and close chambers, and an internal spring returns the spool to its default position when the coil is de-energised. That makes it a fail-safe control element for automated valves.
Why NAMUR Matters for Actuator Control
NAMUR is a German-based association of process-industry users. Its recommendations define standardised interfaces so that components from different manufacturers fit together without custom adapters. For pneumatic actuators, two documents are most relevant:
- NAMUR VDI/VDE 3845 (often called NAMUR mounting) — defines the bolt pattern, spigot dimensions and port numbering on the actuator's accessory face. A NAMUR-mounted pilot valve bolts straight onto the actuator, eliminating hoses, brackets and adapters.
- NAMUR NE 107 / NE 27 — related recommendations covering diagnostic status messages and pilot-valve interfaces, widely referenced in process instrumentation procurement.
The practical benefit: a valve, actuator and positioner from three different suppliers can be assembled on site in minutes, and spare parts are interchangeable across plants. That is why NAMUR is the default pilot-valve interface for automated valves in Europe, the Middle East, Southeast Asia and Latin America.
How the 4M310-08 Works in a Typical Circuit
- Air supply: Filtered compressed air at 0.15–0.8 MPa enters port 1 (P). A 40 µm filter upstream is sufficient; no lubricator is needed.
- Energise: The PLC energises the solenoid coil. The internal pilot shifts the spool, connecting supply air to port 2 (A) and exhausting port 4 (B) — the actuator rotates to the "open" position, for example.
- De-energise: The spring returns the spool. Supply air now feeds port 4 (B), and port 2 (A) exhausts — the actuator rotates back to "closed".
- Manual override: A built-in manual button allows local operation during commissioning or maintenance, without energising the coil.
Because the valve is internally piloted, it uses the same supply air as the actuator — no separate pilot-air line. For low-pressure or vacuum actuator applications where internal pilot pressure is insufficient, an externally piloted variant can be ordered.
Global Application Scenarios
The 4M310-08 NAMUR valve is found wherever a quarter-turn actuator needs reliable on/off control. Common scenarios by region and industry:
Water and Wastewater Treatment (Europe, Middle East, Southeast Asia)
Automated butterfly valves on filtration backwash lines, dosing skids and distribution headers. The valve's G1/4" ports and 25 mm² orifice suit actuators in the 50–200 N·m torque range, and the oil-free design avoids air-line oil mist near potable-water equipment. In the Gulf region, NAMUR is the standard spec for EPC valve-automation packages.
Food, Beverage and Packaging Machinery (Europe, North America, Asia)
Filling, capping, cartoning and palletising lines use NAMUR valves directly on actuator faces for washdown-friendly, hose-free installation. The IP65 coil housing withstands humid, dusty environments, and the aluminium body is easy to wipe clean. High-cycle lines benefit from the valve's 4 cycles/second rating and long-life spool design.
Oil, Gas and Chemical Processing (Middle East, Russia, Latin America)
Automated ball valves on process skids, tank-farm manifolds and burner-management lines. NAMUR mounting simplifies retrofit work: the old pilot valve is unbolted and a replacement 4M310-08 fits the same pad without re-piping. Voltage options (DC24V, AC220V, AC110V and others) match existing control-room architectures.
Pharmaceutical and Biotech Plants (Europe, India, South Korea)
Clean-utility valve manifolds where documentation and interchangeability matter. Because NAMUR geometry is standardised, validation teams can swap pilot valves without modifying the qualified actuator assembly. Spring-return operation provides a defined fail position on loss of power — a frequent requirement in batch sequencing.
Automotive and General Manufacturing (Global)
Robotic weld-cell clamp cylinders, paint-line isolation valves and test-rig actuators. The valve's low starting pressure (0.15 MPa) suits energy-efficient plants that reduce supply pressure overnight, and manual override supports line-side troubleshooting.
Selection Checklist Before You Order
Before requesting a quotation, confirm these five points with your supplier:
- Voltage — DC24V for PLC-driven systems; AC220V or AC110V for legacy or mains-powered circuits. Verify ±10% tolerance against your supply.
- Pilot type — internal pilot suits standard plant air above 0.15 MPa; external pilot is needed for low-pressure media or vacuum service.
- NAMUR pad geometry — confirm the actuator's mounting face matches the standard NAMUR bolt pattern and port numbering; ask for the interface drawing in millimetres.
- Fail-safe direction — with a single-solenoid spring-return valve, decide which actuator travel (open or close) is the de-energised default, and wire/pipe accordingly.
- Certification documents — request CE/EMC declaration and material data sheet with your order; ISO 9001-certified factories can supply these routinely.
Maintenance and Service Life
The valve is designed for millions of cycles with no lubrication. To keep it reliable:
- Check upstream filter condition periodically; a clogged element causes pilot starvation and slow shifting.
- Exercise valves that sit idle for long periods — at least one full stroke per month prevents spool sticking.
- Listen at the exhaust port during switching: delayed or continuous exhaust flow indicates seal wear or contamination.
- Keep coil connectors dry and torqued; moisture ingress is the most common cause of IP65 failures in humid climates.
Frequently Asked Questions
Can the 4M310-08 replace other brands' NAMUR valves?
Yes. Because the NAMUR mounting interface and port numbering are standardised, the valve bolts onto NAMUR-pattern actuators from major brands without adapters. Compare the interface drawing, orifice size and pressure rating against your existing valve before ordering.
What is the difference between 4M210-08 and 4M310-08?
The 4M210-08 is the smaller 200-series body with a lower flow capacity; the 4M310-08 has a 25 mm² orifice and suits actuators needing faster stroking or higher torque. Both share the same NAMUR pad and port size.
Does the valve need a lubricator?
No. The spool and seals are designed for oil-free operation. Removing lubrication avoids oil mist in exhaust air, which matters in food, pharmaceutical and potable-water installations.
What voltage options are available?
Standard coils cover DC24V, DC12V, AC24V, AC110V and AC220V. Connection is via DIN plug or lead-wire; LED indicator options simplify fault-finding on valve islands.
How do I verify a supplier before buying?
Look for a factory (not just a trading company) with ISO 9001 certification, published NAMUR interface drawings, and the ability to supply CE documents. Ask whether manifold bases, blanking plates and spare coils are stocked — long-term spare availability matters more than the initial unit price.
Ningbo Kailing Pneumatic Co., Ltd. (KLQD) manufactures pneumatic solenoid valves, actuators, angle seat valves and fittings in Ningbo, China, and supplies NAMUR-mounted pilot valves to OEM and distributor customers worldwide.
Need a quotation?
Send the page link, quantity, drawings and working conditions to Kailing for review.